Click here

NAVIGATION ANTENNA (for Instrument Panel Side) INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL NAVIGATION ANTENNA ASSEMBLY


    1. for LHD:


      1. Install the navigation antenna assembly with the 2 screws.

      2. Attach the 2 clamps.

    2. for RHD:


      1. Install the navigation antenna assembly with the 2 screws.

      2. Attach the 2 clamps.

  2. Click here

    INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    (Click here)

  3. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    CHECK SRS WARNING LIGHT

    (Click here)