NAVIGATION ANTENNA (for Roof Side) INSTALLATION


  1. INSTALL NAVIGATION ANTENNA


    1. A015662

      Align the positioning pin of the navigation antenna and set the antenna on the vehicle.

    2. Attach the 2 claws to install the navigation antenna.

    3. Install the navigation antenna nut.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

    4. Connect the 2 navigation antenna connectors.

    5. Attach the 2 claws to install the protector.

    6. Attach the 4 claws to install the 2 navigation antenna connectors.

  2. INSTALL NO. 3 REAR ROOF AIR DUCT


    1. A0155SV

      Install the duct with the clip.

  3. INSTALL NO. 4 REAR ROOF AIR DUCT


    1. A0155YE

      Install the duct with the 2 clips.

  4. INSTALL NO. 5 REAR ROOF AIR DUCT


    1. A015B6M

      w/o Sliding Roof:

      Install the duct with the 2 clips.

    2. A0155CM

      w/ Sliding Roof:

      Install the duct with the 2 clips.

  5. INSTALL ROOF HEADLINING ASSEMBLY


    1. w/ Sliding Roof:

      Click here

    2. w/o Sliding Roof:

      (See page ) Click here)

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.