TOYOTA PARKING ASSIST-SENSOR SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting /

    5. Select the setting by referring to the table below.

      Warning
      Display Default Contents Setting
      Rr Sensor Onset Range Wide Sets the buzzer activation range for the rear sensors. Narrow or Wide
      Keep Sense Buzzer Avail Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail
      Fr & Rr Buzzer Volume H Changes the buzzer volume setting. L, M1, M2, M3 or H
      Sensor
      Display Default Contents Setting
      Sensor Condition N Avail Makes the sensors available when the shift lever is in N. Not Avail or Avail
      Front Side Dist Sensor Long Sets the buzzer activation range for the front sensors. Short or Long
      Reverse Range Front Sensor Fsde Changes the operation setting for the vehicle front sensors when the shift lever is in R. F, Fs,Fc, Fsde or F Stop
      Non P/R Range Rear Sensor R Stop Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R. R, Rcrn or R Stop
      Display
      Display Default Contents Setting
      Approach Display OFF Avail The display when moving away from a previously detected obstacle. Not Avail or Avail
      Display Mode All The display mode setting (when the intuitive parking assist system is normal). All or Undisp

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Turn the engine switch on (IG).

    2. Enter the following menus: Setup / Vehicle / TOYOTA park assist.

    3. Select the setting by referring to the table below.

      Warning
      Display Default Contents Setting
      Alert volume 3 Sets the buzzer activation range for the rear center sensors. 1, 2, 3, 4 or 5
      Display On The display mode setting (when the TOYOTA parking assist-sensor system is normal). On or Off
      Distance Wide Sets the buzzer activation range for the rear center sensors. Narrow or Wide