MULTI-DISPLAY (w/ Navigation System) INSTALLATION


  1. INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. Install the No.1 radio receiver bracket with the 4 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  2. INSTALL MULTI-DISPLAY ASSEMBLY


    1. Connect the connectors.

    2. A0155G5

      Insert the multi-display assembly and attach the 2 clips and 6 claws on its backside.

      Note

      When inserting the multi-display assembly, do not press the knobs on it.

    3. A015CPEE01

      Install the multi-display assembly with the 2 screws and 2 bolts.

      Torque:
      Bolt A
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  3. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0157V5

    1. Connect the connector.

    2. Attach the 6 claws to install the No. 4 instrument panel register.

  4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0155N4

    1. Connect the connector.

    2. Attach the 6 claws to install the No. 3 instrument panel register.

  5. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    A015A0J

    1. Attach the 8 claws to install the opening cover.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.