NAVIGATION SYSTEM, Diagnostic DTC:B15E5

DESCRIPTION

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK DTC (CAN COMMUNICATION SYSTEM)

   
   

   1. Check for DTCs and check if the same DTCs are output.

      
      

      • for LHD:Click here

      • for RHD:Click here

      Table 1. Result

      Result	Proceed to
      No DTCs are output	A
      DTCs are output (for LHD)	B
      DTCs are output (for RHD)	C

   
   
   • AClick here
   • BClick here
   • CClick here
2. Click here

   CHECK DTC (SFI SYSTEM OR ECD SYSTEM)

   
   

   1. Check for DTCs and check if the same DTCs are output.

      Tip:

      Refer to SFI system or ECD system.

      
      

      • SFI system (1GR-FE):Click here

      • SFI system (1UR-FE):Click here

      • SFI system (3UR-FE):Click here

      • ECD system (1VD-FTV [w/ DPF]):Click here

      • ECD system (1VD-FTV [w/o DPF]):Click here

      OK
      No DTCs are output.

   
   
   • OKClick here
   • NGClick here
3. Click here

   CLEAR DTC

   
   

   1. Clear the DTCs (Click here).

   
   
   • NEXTClick here
4. Click here

   CHECK DTC

   
   

   1. Recheck for DTCs and check if the same DTC are output again (Click here).

      OK
      No DTCs are output.

   
   
   • OKClick here
   • NGClick here
5. Click here

   GO TO CAN COMMUNICATION SYSTEMClick here

6. Click here

   GO TO SFI SYSTEM OR ECD SYSTEM

7. Click here

   REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLYClick here

8. Click here

   USE SIMULATION METHOD TO CHECKClick here

9. Click here

   GO TO CAN COMMUNICATION SYSTEMClick here