Click here

PILLAR SPEAKER (for Front Side) REMOVAL

Click here
Click here Click here
  1. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  2. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. Click here

    REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

    Tip:

    Use the same procedure to remove the front assist grip on the other side.


    1. Detach the 4 claws and remove the 2 assist grip plugs.

    2. A0156G7

      Remove the 2 bolts.

    3. Detach the 2 claws and remove the front assist grip.

  4. Click here

    REMOVE FRONT PILLAR GARNISH LH


    1. Detach the clip and 3 guides, and remove the front pillar garnish.

    2. for 9, 14 Speakers:

      Disconnect the speaker connector and then remove the front pillar garnish.

    3. A015CWJE01

      Protect the curtain shield airbag.


      1. Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.

        Note:

        Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

  5. Click here

    REMOVE FRONT NO. 3 SPEAKER ASSEMBLY


    1. A01575Z

      Detach the 3 claws and remove the speaker.