REAR DOOR SPEAKER INSPECTION


  1. INSPECT REAR SPEAKER SET (except 14 Speakers)


    1. A0159E5E19
      Text in Illustration
      *1

      Component without harness connected

      (Rear Speaker Set)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 4 Ω

      If the result is not as specified, replace the speaker set.

  2. INSPECT REAR SPEAKER SET (for 14 Speakers)


    1. A0159E5E19
      Text in Illustration
      *1

      Component without harness connected

      (Rear Speaker Set)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 1.5 to 2.3 Ω

      If the result is not as specified, replace the speaker set.

  3. INSPECT REAR NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)


    1. When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

      OK
      Malfunction disappears.

      Tech Tips


      • Connect all the connectors to the rear No. 3 speakers.

      • When there is a possibility that either the right or left rear speaker is defective, inspect by interchanging the right one with the left one.

      • Perform the inspection above on both LH and RH sides.