RADIO RECEIVER (w/ Multi-display) INSTALLATION


  1. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  2. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A015A3V

      Insert the multi-media module receiver assembly to attach the 5 claws on its backside.

      Note

      When inserting the multi-media module receiver assembly, do not press the knobs on it.

    3. A015D93E01

      Install the multi-media module receiver assembly with the 2 screws and 2 bolts.

      Torque:
      Bolt A
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  4. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A0155G5

      Insert the multi-display assembly and attach the 2 clips and 6 claws on its backside.

      Note

      When inserting the multi-display assembly, do not press the knobs on it.

    3. A015CPEE01

      Install the multi-display assembly with the 2 screws and 2 bolts.

      Torque:
      Bolt A
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  5. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0157V5

    1. Connect the connector.

    2. Attach the 6 claws to install the No. 4 instrument panel register.

  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0155N4

    1. Connect the connector.

    2. Attach the 6 claws to install the No. 3 instrument panel register.

  7. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    A015A0J

    1. Attach the 8 claws to install the opening cover.

  8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    A015A00

    1. Connect the connectors.

    2. Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.

  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    A015BRH

    1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

    2. Install the clip and screw.

  10. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    A01556Z

    1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.

  11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    A015BUX

    1. Connect the connectors and attach the 2 clamps.

    2. Attach the 8 claws to install the lower instrument panel pad sub-assembly.

    3. Install the clip and screw.

  12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A0155LC

    1. Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.