Click here

RADIO RECEIVER (w/o Stereo Component Amplifier) INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. A0158QL

      Attach the 2 claws to install the hazard warning switch.

  2. Click here

    INSTALL CLOCK ASSEMBLY


    1. A01574D

      Install the clock with the 2 screws.

  3. Click here

    INSTALL NO. 1 RADIO BRACKET


    1. A0158R3

      Install the bracket with the 3 bolts.

      3.0 N*m 30 kgf*cm 26 in.*lbf
  4. Click here

    INSTALL NO. 2 RADIO BRACKET


    1. A0155FR

      Install the bracket with the 3 bolts.

      3.0 N*m 30 kgf*cm 26 in.*lbf
  5. Click here

    INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A0158M9

      Install the radio receiver with the 2 screws and 2 bolts.

      Bolt
      12 N*m 122 kgf*cm 9 ft.*lbf
  6. Click here

    INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


    1. A01563Z

      Insert the cluster finish panel and attach the 10 claws on its backside to install it.

  7. Click here

    INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. Attach the 6 claws to install the No. 4 instrument panel register.

  8. Click here

    INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. Attach the 6 claws to install the No. 3 instrument panel register.

  9. Click here

    INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. Attach the 8 claws to install the opening cover.

  10. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).