LUGGAGE SPEAKER REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

    Tech Tips

    Use the same procedures described for the LH side Click here.

  5. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

    Tech Tips

    Use the same procedures described for the LH side Click here.

  6. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

    A015BES

    1. Detach the 6 clips and remove the support plate.

  7. REMOVE REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to remove the step cover on the other side.


    1. Detach the 2 claws and remove the step cover.

  8. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  9. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

    A0155W0E01

    Tech Tips

    Use the same procedure to remove the rear seat cover cap on the other side.


    1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

      Tech Tips

      Tape the screwdriver tip before use.

  10. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    A015DVZ

    Tech Tips

    Use the same procedure to remove the tonneau cover holder cap on the other side.


    1. Detach the 2 claws and remove the tonneau cover holder cap.

  11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

    A015DJL

    Tech Tips

    When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. A0157CJ

      Detach the 3 claws and remove the cover.

    2. A015CPR

      Remove the bolt and rear No. 1 seat belt anchor.

    3. A015DRR

      w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. Detach the 3 claws and remove the cover.

      2. A015C42

        Remove the bolt and rear No. 2 seat belt anchor.

    4. w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. Remove the clip and bolt.

      2. Detach the 16 clips and 2 claws.

      3. w/o Rear Air Conditioning System:

        Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.

      4. w/ Rear Air Conditioning System:

        Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.

        A0156CN

    5. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:


      1. Remove the clip.

      2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.

        A0157MJ

    6. w/ Tonneau Cover:


      1. Remove the screw and clip.

      2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.

        A0158OA

  12. REMOVE NO. 1 WOOFER BOX SPEAKER ASSEMBLY


    1. A0158NX

      Disconnect the connector.

    2. Remove the 5 bolts and box speaker.