AUDIO AND VISUAL SYSTEM (w/o Stereo Component Amplifier) CD cannot be Inserted or is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK IF PROPER CD IS INSERTED


    1. Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.

      OK
      Normal audio CD.

      Tech Tips

      Translucent or uniquely-shaped CDs cannot be played.


    NG

    CD IS FAULTY

    OK

  2. CHECK THAT CD IS INSERTED PROPERLY


    1. Check whether or not the CD is inserted upside down.

      OK
      CD is properly inserted.

    NG

    INSERT CD PROPERLY

    OK

  3. CLEAN CD


    1. A015BVW

      Clean the disc by wiping the CD underside radially with a soft cloth.

      OK
      Malfunction disappears.

      Note

      Do not use a conventional record cleaner or anti-static preservative.


    NG

    REPLACE CD WITH ANOTHER AND RECHECK Click here

    OK

    CD WAS DIRTY

  4. REPLACE CD WITH ANOTHER AND RECHECK


    1. Replace the CD with a normal one and check if the same problem occurs again.

      OK
      Malfunction disappears.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    CD IS FAULTY