AUDIO AND VISUAL SYSTEM (w/o Stereo Component Amplifier) Cassette Tape cannot be Ejected

Click here

INSPECTION PROCEDURE

Click here

PROCEDURE

1. Click here

   CHECK OPERATION

   
   

   1. Press "EJECT" and check the operation.

      
      

      1. Press the cassette tape EJECT switch of the radio receiver assembly for 2 seconds or more and check that the cassette tape is ejected.

         OK
         The cassette tape is ejected.

   
   
   • OKClick here
   • NGClick here
2. Click here

   CHECK CASSETTE TAPE

   
   

   1. Check the cassette tape.

      
      

      1. Check that the ejected cassette tape does not have a peeled label, a cassette body deformation or any other defect.

         OK
         No fault on the cassette tape.

   
   
   • OKClick here
   • NGClick here
3. Click here

   REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK

   
   

   1. Replace the cassette tape with a normal one and check if the same problem occurs again.

      OK
      Malfunction disappears.

   
   
   • OKClick here
   • NGClick here
4. Click here

   REPLACE RADIO RECEIVER ASSEMBLYClick here

5. Click here

   CASSETTE TAPE IS FAULTY