Click here

AUDIO AND VISUAL SYSTEM (w/o Navigation System) Radio Receiver Power Source Circuit

Click here
Click here Click here
DTC Code DTC Name
  Radio Receiver Power Source Circuit
Click here

DESCRIPTION

This circuit provides power to the radio receiver assembly.

Click here

WIRING DIAGRAM

Click here

INSPECTION PROCEDURE

Note:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

Click here

PROCEDURE


  1. Click here

    INSPECT RADIO RECEIVER ASSEMBLY


    1. A0156PBE43

      Disconnect the F1 radio receiver assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      F1-20 (GND) - Body ground Always Below 1 Ω

    3. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      F1-1 (B) - F1-20 (GND) Always 11 to 14 V
      F1-11 (ACC) - F1-20 (GND) Engine switch on (ACC) 11 to 14 V
      Table 1. Text in Illustration
      *1

      Front view of wire harness connector

      (to Radio Receiver Assembly)

  2. Click here

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLEClick here

  3. Click here

    REPAIR OR REPLACE HARNESS OR CONNECTOR