| DTC Code | DTC Name |
|---|---|
| CB-45 | USB Communication Error |
| CB-46 | iPod Control Error |
| CB-47 | iPod Communication Error |
DESCRIPTION
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| CB-45 | Communication error with USB device |
|
| CB-46 | "iPod" control software malfunction |
|
| CB-47 | Communication error with "iPod" |
PROCEDURE
REPLACE USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the engine switch off.
When one of these DTCs has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
CLEAR DTC
Clear the DTCs (Click here).
RECHECK FOR DTC
Recheck for DTCs and check if the same DTC occurs again.
If DTCs are detected frequently, replace the multi-media interface ECU.
| OK |
|---|
| Malfunction disappears. |
USB DEVICE OR "iPod" WAS DEFECTIVE
REPLACE MULTI-MEDIA INTERFACE ECUClick here