AUDIO AND VISUAL SYSTEM (w/ Navigation System) Speaker Circuit

DESCRIPTION

The stereo component amplifier assembly sends a sound signal to the speakers.

WIRING DIAGRAM

A015C3CE01
A015A8EE01

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - SPEAKERS)


    • *1: for RH Side

    • *2: for LH Side

    • *3: for 14 Speakers

    • *4: for 9 Speakers


    1. Disconnect the F74 stereo component amplifier assembly connector.

    2. Disconnect the I1*1 and/or I10*2 front No. 1 speaker assembly connector.

    3. Disconnect the F7*1 and/or F8*2 front No. 2 speaker assembly connector.

    4. Disconnect the F6 front No. 4 speaker assembly connector.

    5. Disconnect the J15*1 and/or J17*2 rear speaker set connector*4.

    6. Disconnect the J2*1 and/or J9*2 rear No. 3 speaker connector*3.

    7. Disconnect the S8*1 and/or S9*2 rear header speaker assembly connector*3.

    8. Disconnect the L4 No. 1 woofer box speaker connector.*3

    9. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      F74-5 (WFR+) - I1-1*1 Always Below 1 Ω
      F74-20 (WFR-) - I1-2*1 Always Below 1 Ω
      F74-4 (WFL+) - I10-1*2 Always Below 1 Ω
      F74-19 (WFL-) - I10-2*2 Always Below 1 Ω
      F74-13 (FR+) - F7-1 (+)*1 Always Below 1 Ω
      F74-28 (FR-) - F7-3 (-)*1 Always Below 1 Ω
      F74-12 (FL+) - F8-1 (+)*2 Always Below 1 Ω
      F74-27 (FL-) - F8-2 (-)*2 Always Below 1 Ω
      F74-7 (CTR+) - F6-1 Always Below 1 Ω
      F74-22 (CTR-) - F6-2 Always Below 1 Ω
      F74-15 (RR+) - J15-1*1, *4 Always Below 1 Ω
      F74-30 (RR-) - J15-2*1, *4 Always Below 1 Ω
      F74-14 (RL+) - J17-1*2, *4 Always Below 1 Ω
      F74-29 (RL-) - J17-2*2, *4 Always Below 1 Ω
      F74-15 (R-R+) - J2-1 (+)*1, *3 Always Below 1 Ω
      F74-30 (R-R) - J2-3 (-)*1, *3 Always Below 1 Ω
      F74-14 (R-L+) - J9-1 (+)*2, *3 Always Below 1 Ω
      F74-29 (R-L-) - J9-3 (-)*2, *3 Always Below 1 Ω
      F74-11 (SR+) - S8-1 (RRD+)*1, *3 Always Below 1 Ω
      F74-26 (SR-) - S8-2 (RRD-)*1, *3 Always Below 1 Ω
      F74-10 (SL+) - S9-1 (RLD+)*2, *3 Always Below 1 Ω
      F74-25 (SL-) - S9-2 (RLD-)*2, *3 Always Below 1 Ω
      F74-6 (WF1+) - L4-1 (WF1+)*3 Always Below 1 Ω
      F74-21 (WF1-) - L4-2 (WF1-)*3 Always Below 1 Ω
      F74-8 (WF2+) - L4-3 (WF2+)*3 Always Below 1 Ω
      F74-23 (WF2-) - L4-4 (WF2-)*3 Always Below 1 Ω
      F74-5 (WFR+) - Body ground Always 10 kΩ or higher
      F74-20 (WFR-) - Body ground Always 10 kΩ or higher
      F74-4 (WFL+) - Body ground Always 10 kΩ or higher
      F74-19 (WFL-) - Body ground Always 10 kΩ or higher
      F74-13 (FR+) - Body ground Always 10 kΩ or higher
      F74-28 (FR-) - Body ground Always 10 kΩ or higher
      F74-12 (FL+) - Body ground Always 10 kΩ or higher
      F74-27 (FL-) - Body ground Always 10 kΩ or higher
      F74-7 (CTR+) - Body ground Always 10 kΩ or higher
      F74-22 (CTR-) - Body ground Always 10 kΩ or higher
      F74-15 (RR+) - Body ground Always 10 kΩ or higher
      F74-30 (RR-) - Body ground Always 10 kΩ or higher
      F74-14 (RL+) - Body ground Always 10 kΩ or higher
      F74-29 (RL-) - Body ground Always 10 kΩ or higher
      F74-15 (R-R+) - Body ground Always 10 kΩ or higher
      F74-30 (R-R) - Body ground Always 10 kΩ or higher
      F74-14 (R-L+) - Body ground Always 10 kΩ or higher
      F74-29 (R-L-) - Body ground Always 10 kΩ or higher
      F74-11 (SR+) - Body ground Always 10 kΩ or higher
      F74-26 (SR-) - Body ground Always 10 kΩ or higher
      F74-10 (SL+)- Body ground Always 10 kΩ or higher
      F74-25 (SL-) - Body ground Always 10 kΩ or higher
      F74-6 (WF1+) - Body ground Always 10 kΩ or higher
      F74-21 (WF1-) - Body ground Always 10 kΩ or higher
      F74-8 (WF2+) - Body ground Always 10 kΩ or higher
      F74-23 (WF2-) - Body ground Always 10 kΩ or higher

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  2. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    1. A0156GE

      Disconnect the front No. 1 speaker assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for 14 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 1.8 to 2.6 Ω
      for 9 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 3 Ω
      Result
      Result Proceed to
      OK (for 14 Speakers) A
      OK (for 9 Speakers) B
      NG C

    B

    Click here

    C

    REPLACE FRONT NO. 1 SPEAKER ASSEMBLY Click here

    A

  3. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY


    1. A015AWXE02
      Text in Illustration
      *A for RH Side
      *B for LH Side

      Disconnect the front No. 2 speaker assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for RH Side
      Tester Connection Condition Specified Condition
      1 (+) - 2 (TWR+) Always Below 1 Ω
      3 (-) - 4 (TWR-) Always Below 1 Ω
      2 (TWR+) - 4 (TWR-) Always 1.5 to 2.5 Ω
      for LH Side
      Tester Connection Condition Specified Condition
      1 (+) - 2 (TWL+) Always Below 1 Ω
      3 (-) - 4 (TWL-) Always Below 1 Ω
      2 (TWL+) - 4 (TWL-) Always 1.5 to 2.5 Ω

    NG

    REPLACE FRONT NO. 2 SPEAKER ASSEMBLY Click here

    OK

  4. CHECK FRONT NO. 3 SPEAKER ASSEMBLY


    1. Temporarily replace the front No. 3 speaker assembly with a new or normally functioning one Click here.

    2. Check for DTCs and check if the same DTCs is output Click here.

      OK
      No DTCs are output.

    NG

    Click here

    OK

    END (FRONT NO. 3 SPEAKER ASSEMBLY IS DEFECTIVE)

  5. CHECK FRONT NO. 2 SPEAKER ASSEMBLY


    1. Temporarily replace the front No. 2 speaker assembly with a new or normally functioning one Click here.

    2. Check for DTCs and check if the same DTCs is output Click here.

      OK
      No DTCs are output.

    NG

    Click here

    OK

    END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

  6. INSPECT FRONT NO. 3 SPEAKER ASSEMBLY


    1. A015B0ME02

      Disconnect the front No. 3 speaker assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (-) - 2 (+) Always 4 Ω

    NG

    REPLACE FRONT NO. 3 SPEAKER ASSEMBLY Click here

    OK

  7. CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER - FRONT NO. 3 SPEAKER)


    • *1: for RH Side

    • *2: for LH Side


    1. Disconnect the F7*1 and/or F8*2 front No. 2 speaker assembly connector.

    2. Disconnect the F13*1 and/or F14*2 front No. 3 speaker assembly connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for RH Side
      Tester Connection Condition Specified Condition
      F7-2 (TWR+) - F13-1 Always Below 1 Ω
      F7-4 (TWR-) - F13-2 Always Below 1 Ω
      F7-2 (TWR+) - Body ground Always 10 kΩ or higher
      F7-4 (TWR-) - Body ground Always 10 kΩ or higher
      for LH Side
      Tester Connection Condition Specified Condition
      F8-2 (TWL+) - F14-1 Always Below 1 Ω
      F8-4 (TWL-) - F14-2 Always Below 1 Ω
      F8-2 (TWL+) - Body ground Always 10 kΩ or higher
      F8-4 (TWL-) - Body ground Always 10 kΩ or higher

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  8. INSPECT FRONT NO. 4 SPEAKER ASSEMBLY


    1. A015A9L

      Disconnect the front No. 4 speaker assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for 14 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 1.5 to 2.5 Ω
      for 9 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 6 Ω

    NG

    REPLACE FRONT NO. 4 SPEAKER ASSEMBLY Click here

    OK

  9. INSPECT REAR SPEAKER SET


    1. A0156GEE03

      Disconnect the rear speaker set connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for 14 Speakers
      Tester Connection Condition Specified Condition
      1 (WF+) - 2 (WF-) Always 1.5 to 2.3 Ω
      for 9 Speakers (for FUJITSU TEN Made)
      Tester Connection Condition Specified Condition
      1 (WF+) - 2 (WF-) Always 4 Ω
      for 9 Speakers (for PIONEER Made)
      Tester Connection Condition Specified Condition
      1 (WF+) - 2 (WF-) Always 5 Ω
      Result
      Result Proceed to
      OK (for 14 Speakers) A
      OK (for 9 Speakers) B
      NG C

    B

    REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY Click here

    C

    REPLACE REAR SPEAKER SET Click here

    A

  10. CHECK HARNESS AND CONNECTOR (REAR NO. 3 SPEAKER - REAR SPEAKER SET)


    • *1: for RH Side

    • *2: for LH Side


    1. Disconnect the J2*1 and/or J9*2 front No. 3 speaker assembly connector.

    2. Disconnect the J18*1 and/or J19*2 rear speaker set connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for RH Side
      Tester Connection Condition Specified Condition
      J2-2 (+) - J18-1 (WF+) Always Below 1 Ω
      J2-4 (-) - J18-2 (WF-) Always Below 1 Ω
      J2-2 (+) - Body ground Always 10 kΩ or higher
      J2-4 (-) - Body ground Always 10 kΩ or higher
      for LH Side
      Tester Connection Condition Specified Condition
      J9-2 (+) - J19-1 (WF+) Always Below 1 Ω
      J9-4 (-) - J19-2 (WF-) Always Below 1 Ω
      J9-2 (+) - Body ground Always 10 kΩ or higher
      J9-4 (-) - Body ground Always 10 kΩ or higher

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  11. INSPECT REAR HEADER SPEAKER ASSEMBLY


    1. A015A9LE03
      Text in Illustration
      *A for RH Side
      *B for LH Side

      Disconnect the rear header assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for RH Side
      Tester Connection Condition Specified Condition
      1 (RRD+) - 2 (RRD-) Always 1.5 to 2.5 Ω
      for LH Side
      Tester Connection Condition Specified Condition
      1 (RLD+) - 2 (RLD-) Always 1.5 to 2.5 Ω

    NG

    REPLACE REAR HEADER SPEAKER ASSEMBLY Click here

    OK

  12. CHECK REAR NO. 3 SPEAKER ASSEMBLY


    1. Temporarily replace the rear No. 3 speaker assembly with a new or normally functioning one Click here.

    2. Check for DTCs and check if the same DTCs is output Click here.

      OK
      No DTCs are output.

    NG

    Click here

    OK

    END (REAR NO. 3 SPEAKER ASSEMBLY IS DEFECTIVE)

  13. INSPECT NO. 1 WOOFER BOX SPEAKER ASSEMBLY


    1. A015AFZE02

      Disconnect the No. 1 woofer box speaker assembly speaker connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LH Side
      Tester Connection Condition Specified Condition
      1 (WF1+) - 2 (WF1-) Always 1.6 to 2.4 Ω
      for RH Side
      Tester Connection Condition Specified Condition
      3 (WF2+) - 4 (WF2-) Always 1.6 to 2.4 Ω

    NG

    REPLACE NO. 1 WOOFER BOX SPEAKER Click here

    OK

    REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY Click here