AUDIO AND VISUAL SYSTEM (w/ Navigation System), Diagnostic DTC:B1575

DESCRIPTION

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CLEAR DTC

   
   

   1. Clear the DTCs (Click here).

   
   
   • NEXTClick here
2. Click here

   CHECK DTC

   
   

   1. Recheck for DTCs and check if the same DTC is output again (Click here).

      OK
      No DTCs are output.

   
   
   • OKClick here
   • NGClick here
3. Click here

   REPLACE HARNESS AND CONNECTOR (GVIF CABLE)

   
   

   1. Replace the harness and connector (GVIF cable) with a new or normally functioning one.

   
   
   • NEXTClick here
4. Click here

   CLEAR DTC

   
   

   1. Clear the DTCs (Click here).

   
   
   • NEXTClick here
5. Click here

   CHECK DTC

   
   

   1. Recheck for DTCs and check if the same DTC is output again (Click here).

      OK
      No DTCs are output.

   
   
   • OKClick here
   • NGClick here
6. Click here

   USE SIMULATION METHOD TO CHECKClick here

7. Click here

   REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLYClick here

8. Click here

   END (GVIF CABLE IS DEFECTIVE)