MULTIPLEX TILT AND TELESCOPIC ECU INSTALLATION


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

    A01596C

    1. Install the ECU with the 2 screws.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

    2. Connect the 2 connectors.

      Note

      The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

    A015BS1

    1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.

    2. Tighten the 2 tapered-head bolts until the bolt heads break off.

  3. INSTALL STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

    Tech Tips

    Refer to the instructions for installation of the steering column assembly Click here.