Click here

MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

    (Click here)

  2. Click here

    REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.

    3. A01578XE03

      Using a screw extractor, remove the 2 bolts and the steering lock actuator assembly from the steering column assembly.

  3. Click here

    REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. Disconnect the 2 connectors.

    2. Remove the 2 screws and ECU.