VANE PUMP (for 1UR-FE) DISASSEMBLY


  1. FIX VANE PUMP ASSEMBLY


    1. A0156W2E01

      Using SST, fix the vane pump in a vise.

      SST
      09630-00014   ( 09631-00132 )

  2. REMOVE POWER STEERING SUCTION PORT UNION

    A0158YB

    1. Remove the bolt and suction port union from the vane pump.

    2. Using a screwdriver, remove the O-ring from the suction port union.

  3. REMOVE FLOW CONTROL VALVE

    A0157E8

    1. Remove the pressure port union.

    2. Remove the O-ring from the pressure port union.

    3. Remove the flow control valve and compression spring.

  4. REMOVE VANE PUMP REAR HOUSING


    1. A015AIR

      Remove the 4 bolts and rear housing from the front housing.

    2. A015C50E04

      Using a screwdriver, remove the O-ring from the rear housing.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE VANE PUMP SHAFT WITH VANE PUMP PULLEY


    1. A0157XX

      Using 2 screwdrivers, remove the snap ring from the vane pump shaft.

    2. Remove the vane pump shaft with vane pump pulley.

      Note

      Be careful not to drop or damage the vane pump shaft with vane pump pulley. If it is damaged, replace the vane pump assembly.

  6. REMOVE VANE PUMP ROTOR

    A015A34

    1. Remove the 10 vane pump plates.

      Note

      Take care not to drop the vane pump plate.

    2. Remove the vane pump rotor.

  7. REMOVE VANE PUMP CAM RING

    A015BLA

    1. Remove the cam ring from the front housing.

  8. REMOVE VANE PUMP FRONT SIDE PLATE

    A0156A5

    1. Remove the front side plate from the front housing.

    2. A0155OYE04

      Using a screwdriver, remove the O-ring from the front side plate.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A0159IT

      Remove the O-ring from the front housing.

  9. REMOVE VANE PUMP HOUSING OIL SEAL

    A0156KLE04

    1. Using a screwdriver and piece of cloth, pry out the oil seal.

      Note

      Be careful not to damage the front housing.