POWER STEERING SYSTEM (for 1VD-FTV with DPF) DIAGNOSTIC TROUBLE CODE CHART
Tech Tips
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
| DTC Code | Detection Item | Return-to-normal | See page |
|---|---|---|---|
| C1541 | Vehicle Speed Signal Malfunction | After normal confirmation | |
| C1544 | High Engine Revolution Signal | After normal confirmation | |
| C15F0 | VFC Solenoid Circuit | Engine switch on (IG) again | |
| C15F1 | Steering Angle Sensor Circuit | After normal confirmation | |
| C15F2 | VGRS System Malfunction | After normal confirmation | |
| U0100 | Lost Communication with ECM / PCM "A" | After CAN communication system returns to normal condition or engine switch turned on (IG) again | |
| U0126 | Lost Communication with Steering Angle Sensor Module | After CAN communication system returns to normal condition or engine switch turned on (IG) again | |
| U0129 | Lost Communication with Brake System Control Module | After CAN communication system returns to normal condition or engine switch turned on (IG) again | |
| U0130 | Lost Communication with Steering Effort Control Module | After CAN communication system returns to normal condition or engine switch turned on (IG) again |