VANE PUMP (for 1VD-FTV without DPF) DISASSEMBLY

Note

When using a vise, do not overtighten it.


  1. REMOVE POWER STEERING SUCTION PORT UNION


    1. Remove the bolt and suction port union from the vane pump.

    2. Using a screwdriver, remove the O-ring from the suction port union.

  2. REMOVE FLOW CONTROL VALVE

    A0158VV

    1. Remove the pressure port union.

    2. Remove the O-ring from the pressure port union.

    3. Remove the flow control valve and compression spring.

  3. REMOVE VANE PUMP GEAR


    1. A015AEEE01

      Using soft jaws on a vise, clamp the vane pump.

      Note

      Be careful not to damage the vane pump.

    2. Using SST, remove the gear.

      SST
      09950-30012   ( 09951-03010, 09953-03010, 09954-03010, 09955-03011 )

  4. REMOVE REAR VANE PUMP HOUSING


    1. A015D6R

      Remove the 4 bolts and rear housing from the front housing.

    2. A015C66E01

      Using a screwdriver, remove the O-ring from the rear housing.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE VANE PUMP ROTOR, 10 VANE PUMP PLATES AND VANE PUMP CAM RING


    1. Remove the 10 vane pump plates.

      Note

      Take care not to drop the vane pump plates.

    2. Remove the rotor.

    3. Remove the cam ring from the front housing.

  6. REMOVE VANE PUMP FRONT SIDE PLATE


    1. Remove the front side plate from the front housing.

    2. A01558UE01

      Using a screwdriver, remove the O-ring from the front side plate.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A015CMK

      Remove the O-ring from the front housing.

  7. REMOVE VANE PUMP SHAFT WITH VANE PUMP SHAFT BEARING


    1. A015AR9E01

      Using a screwdriver, remove the snap ring.

      Note

      Be careful not to damage the front housing.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A0156A4E01

      Tape the serrated part of the vane pump shaft.

    3. A015ANX

      Using a press, press out the shaft with bearing.

  8. REMOVE VANE PUMP SHAFT BEARING


    1. A015CBY

      Using 2 screwdrivers, remove the snap ring from the shaft.

      Note

      Be careful not to damage the shaft.

    2. A015A38

      Using a press, press out the bearing from the shaft.

  9. REMOVE VANE PUMP HOUSING OIL SEAL


    1. A0156NL

      Using a screwdriver, pry out the oil seal.

      Note

      Be careful not to damage the front housing.

      Tech Tips

      Tape the screwdriver tip before use.