AIR CONDITIONING PRESSURE SENSOR REMOVAL


  1. REMOVE FRONT BUMPER COVER


    1. for Standard:

      Click here

    2. w/ Winch:

      Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM


    1. Start the engine.

    2. Turn the A/C switch on.

    3. Operate the cooler compressor while the engine speed is approximately 1000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.

    4. Stop the engine.

    5. Recover the refrigerant from the A/C system using a refrigerant recovery unit.

  3. REMOVE AIR CONDITIONER PRESSURE SENSOR

    A015CLC

    1. Disconnect the connector.

    2. Remove the pressure sensor.

    3. Remove O-ring from the pressure sensor.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.