AIR CONDITIONING PANEL (w/o Multi-display) REASSEMBLY


  1. INSTALL CONTROL KNOB SUB-ASSEMBLY

    A015DBJ

    1. Attach the 10 claws to install the control knob sub-assembly.

  2. INSTALL CENTER CLUSTER MODULE LENS


    1. A01582OE01
      Text in Illustration
      *1 Double-sided Tape

      Remove the double-sided tape from the control knob sub-assembly.

    2. Wipe off any tape adhesive residue with cleaner.

    3. Remove the peeling paper from the new center cluster module lens.

      Tech Tips

      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    4. Install the center cluster module lens.

      Note

      Do not reuse the center cluster module lens after removing it.

  3. INSTALL CENTER CLUSTER MODULE CIRCUIT

    A015CQF

    Note

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. Install new packing.

    2. Install the center cluster module circuit.

  4. INSTALL LOWER HEATER CONTROL BASE

    A0159VA

    1. Attach the 7 claws to install the lower heater control base.

    2. Install the 2 screws.