DECELERATION SENSOR (w/ ABS) REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER CONSOLE BOX (w/o Console Box Lid)

    Click here

  4. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

    Click here

  5. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

    Click here

  6. REMOVE DECELERATION SENSOR (for Automatic Transmission)


    1. Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

      A0159PYE01
      A01579RE01

    2. Remove the 2 bolts and sensor.

  7. REMOVE DECELERATION SENSOR (for Manual Transmission)


    1. Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

    2. Remove the 2 bolts and sensor.

      A0155QOE01
      A015DP4E01