Click here

ANTI-LOCK BRAKE SYSTEM, Diagnostic DTC:C1268

Click here
Click here Click here
DTC Code DTC Name
C1268 Transfer L4 Position Switch Circuit
Click here

DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
C1268 The skid control ECU receives an L4 abnormal status signal from the four wheel drive control ECU via CAN communication for 2 seconds or more.

  • Transfer system


  • Skid control ECU (Master cylinder solenoid)
Click here

INSPECTION PROCEDURE

Note:

After replacing the master cylinder solenoid, perform zero point calibration and store the system information (Click here).

Click here

PROCEDURE


  1. Click here

    INSPECT TRANSFER L4 SHIFT


    1. Shift the transfer to L4, and then drive the vehicle and check that there are no problems with the transfer system.

      OK
      There are no problems with the transfer system.

  2. Click here

    RECONFIRM DTC


    1. Clear the DTCs (Click here).

    2. Turn the ignition switch off.

    3. Shift the transfer to L4, drive the vehicle, and then check for DTCs (Click here).

      Table 1. Result
      Result Proceed to
      DTC is not output A
      DTC is output (for LHD) B
      DTC is output (for RHD) C

  3. Click here

    REPLACE MASTER CYLINDER SOLENOIDClick here

  4. Click here

    GO TO TRANSFER SYSTEM (PROBLEM SYMPTOMS TABLE)Click here

  5. Click here

    CHECK FOR INTERMITTENT PROBLEMSClick here

  6. Click here

    REPLACE MASTER CYLINDER SOLENOIDClick here