Click here

STABILIZER CONTROL VALVE (w/ KDSS) REASSEMBLY

Click here
Click here Click here
  1. Click here

    INSTALL STABILIZER CONTROL ADAPTER SHUTTER VALVE (for Lower Chamber Side)


    1. Apply a small amount of suspension fluid to a new O-ring and install it to the shutter valve.

    2. Install the shutter valve to the adapter housing.

      14 N*m 143 kgf*cm 10 ft.*lbf
  2. Click here

    INSTALL STABILIZER CONTROL ADAPTER SHUTTER VALVE (for Upper Chamber Side)

    Tip:

    Use the same procedures described for the lower chamber side.

  3. Click here

    INSTALL OIL NOZZLE VALVE SUB-ASSEMBLY (for Lower Chamber Side)


    1. Before installing the oil nozzle valve, apply suspension fluid to the oil nozzle valve O-ring.

    2. A01555UE01

      Install the oil nozzle valve to the adapter housing.

      12 N*m 122 kgf*cm 9 ft.*lbf
  4. Click here

    INSTALL OIL NOZZLE VALVE SUB-ASSEMBLY (for Upper Chamber Side)

    Tip:

    Use the same procedures described for the lower chamber side.

  5. Click here

    INSTALL SERVICE VALVE CAP (for Lower Chamber Side)


    1. Install the valve cap to the oil nozzle valve.

      0.6 N*m 6.0 kgf*cm 5.0 in.*lbf
  6. Click here

    INSTALL SERVICE VALVE CAP (for Upper Chamber Side)

    Tip:

    Use the same procedures described for the lower chamber side.