SUSPENSION CONTROL CYLINDER REMOVAL


  1. REMOVE TAILPIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the tailpipe Click here.

    2. for 1UR-FE:

      Remove the tailpipe Click here.

    3. for 3UR-FE:

      Remove the tailpipe Click here.

    4. for 1VD-FTV:

      Remove the tailpipe Click here.

  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the center exhaust pipe Click here.

    2. for 1UR-FE:

      Remove the center exhaust pipe Click here.

    3. for 3UR-FE:

      Remove the center exhaust pipe Click here.

    4. for 1VD-FTV:

      Remove the center exhaust pipe Click here.

  3. REMOVE HEIGHT CONTROL UNIT INSULATOR

    A0156QB

    1. Remove the 3 bolts and insulator from the control unit.

  4. DISCHARGE SUSPENSION FLUID PRESSURE


    1. A0156GY

      Connect a hose to the bleeder plug for the height control accumulator and loosen the bleeder plug.

    2. Discharge the suspension fluid pressure.

    3. After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug and remove the hose.

      Torque:
      6.9 N*m  { 70 kgf*cm, 61 in.*lbf }

  5. REMOVE NO. 7 HEIGHT CONTROL TUBE

    A0159JP

    1. Using a union nut wrench, remove the control tube from the control valve and pump accumulator.

  6. REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY

    A015CGD

    1. Remove the 3 nuts and pump accumulator.

  7. REMOVE CLAMP


    1. Remove the clamp from the 3 height control tubes.

  8. REMOVE NO. 6 HEIGHT CONTROL TUBE

    A01589QE01

    1. Using a union nut wrench, remove the No. 6 height control tube from the control valve and center cylinder.

  9. REMOVE NO. 6 HEIGHT CONTROL TUBE LH


    1. Using a union nut wrench, remove the No. 6 height control tube LH from the control valve and center cylinder.

      A0155MME01

  10. REMOVE NO. 5 HEIGHT CONTROL TUBE LH

    A0159Y3E01

    1. Using a union nut wrench, remove the No. 5 height control tube LH from the control valve and center cylinder.

  11. REMOVE NO. 5 HEIGHT CONTROL TUBE


    1. Using a union nut wrench, remove the No. 5 height control tube from the control valve and center cylinder.

      A0156TXE01

  12. DISCONNECT REAR NO. 4 HEIGHT CONTROL TUBE


    1. A015BE8E01

      Disconnect the connector.

    2. Remove the union bolt and gasket, then disconnect the rear No. 4 height control tube from the control valve.

  13. REMOVE NO. 1 HEIGHT CONTROL VALVE ASSEMBLY

    A0159M8

    1. Remove the 3 nuts and control valve.

    2. Remove the 3 bolt holders and 3 bolt cushions from the control valve.

  14. DISCONNECT NO. 3 HEIGHT CONTROL TUBE

    A0156RP

    1. Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.

  15. DISCONNECT NO. 4 HEIGHT CONTROL TUBE LH

    A015CY9

    1. Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.

  16. DISCONNECT NO. 4 HEIGHT CONTROL TUBE

    A01582F

    1. Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.

  17. DISCONNECT NO. 3 HEIGHT CONTROL TUBE LH

    A015812

    1. Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.

  18. REMOVE HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY

    A0156TK

    1. Remove the 2 bolts and bracket with cylinder.

  19. REMOVE CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY

    A0156BT

    1. Remove the 2 nuts and cylinder from the bracket.