Click here

HEIGHT CONTROL ACCUMULATOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE TAILPIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the tailpipe (Click here).

    2. for 1UR-FE:

      Remove the tailpipe (Click here).

    3. for 3UR-FE:

      Remove the tailpipe (Click here).

    4. for 1VD-FTV:

      Remove the tailpipe (Click here).

  2. Click here

    REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. for 1GR-FE:

      Remove the center exhaust pipe (Click here).

    2. for 1UR-FE:

      Remove the center exhaust pipe (Click here).

    3. for 3UR-FE:

      Remove the center exhaust pipe (Click here).

    4. for 1VD-FTV:

      Remove the center exhaust pipe (Click here).

  3. Click here

    REMOVE HEIGHT CONTROL UNIT INSULATOR


    1. Remove the 3 bolts and insulator from the control unit.

  4. Click here

    DISCHARGE SUSPENSION FLUID PRESSURE


    1. A0156GY

      Connect a hose to the bleeder plug for the height control accumulator and loosen the bleeder plug.

    2. Discharge the suspension fluid pressure.

    3. After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug and remove the hose.

      6.9 N*m 70 kgf*cm 61 in.*lbf
  5. Click here

    REMOVE NO. 7 HEIGHT CONTROL TUBE


    1. Using a union nut wrench, remove the control tube from the control valve and pump accumulator.

  6. Click here

    REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY


    1. Remove the 3 nuts and pump accumulator.