Click here

ACTIVE HEIGHT CONTROL SUSPENSION HOW TO PROCEED WITH TROUBLESHOOTING

Click here
Click here Click here
Tip:

  • Use these procedures to troubleshoot the active height control suspension.

  • *: Use the intelligent tester.


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP


    • NEXT
  2. Click here

    INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.


    • NEXT
  3. Click here

    CHECK FOR DTC*


    1. Check for DTCs (Click here).

    2. Clear the DTCs.

    3. Recheck for DTCs.

      Table 1. Result
      Result Proceed to
      DTC is not output A
      CAN DTC is output B
      DTC is output C

      • B
      • Go to CAN communication system
      • C
      • Go to step 6
      • A
  4. Click here

    PROBLEM SYMPTOMS TABLE*

    Table 2. Result:
    Result Proceed to
    Fault is not listed in problem symptoms table A
    Fault is listed in problem symptoms table B

    • B
    • Go to step 6
    • A
  5. Click here

    OVERALL ANALYSIS AND TROUBLESHOOTING


    1. Terminals of ECU (Click here).


      • NEXT
  6. Click here

    ADJUST, REPAIR OR REPLACE*


    • NEXT
  7. Click here

    CONFIRMATION TEST


    • NEXT
    • END