REAR DIFFERENTIAL LOCK POSITION SWITCH (w/ Differential Lock) INSPECTION


  1. INSPECT REAR DIFFERENTIAL LOCK POSITION SWITCH (NO. 1 TRANSFER INDICATOR SWITCH)


    1. Measure the resistance according to the value(s) in the table below.

      A0158LDE01
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (+B) - 1 (GND) Pushed Below 1 Ω
      Not pushed 100 kΩ or higher

      If the result is not as specified, replace the rear differential lock position switch.