INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
Install a new gasket.
Install the differential carrier with the 10 washers and 10 nuts.
CONNECT PROPELLER SHAFT ASSEMBLY
Align the matchmarks on the propeller shaft flange and differential flange.
Connect the propeller shaft with the 4 bolts, 4 washers and 4 nuts.
INSTALL REAR AXLE SHAFT
Install the axle shaft Click here.
ADD DIFFERENTIAL OIL
Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the differential filler plug hole.
Note
Too much or too little oil will lead to differential problems.
After changing the oil, drive the vehicle and then check the oil level again.
| Front differential oil type and viscosity |
|---|
| Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent |
| Rear Differential Oil Type and Viscosity | ||||||
|---|---|---|---|---|---|---|
|
| Front differential capacity |
|---|
| 1.85 to 1.95 liters (1.96 to 2.06 US qts., 1.63 to 1.71 Imp. qts.) |
| Rear Differential Capacity | |||||||
|---|---|---|---|---|---|---|---|
|
for Front Differential:
Using a 10 mm hexagon wrench, install a new gasket and the filler plug.
Install the engine under cover.
for Rear Differential:
Install a new gasket and the filler plug.