FRONT DIFFERENTIAL CARRIER ASSEMBLY INSTALLATION


  1. INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY


    1. A015CCNE01

      Install the differential support assembly with bolts E and F.

      Torque:
      100 N*m  { 1020 kgf*cm, 74 ft.*lbf }

    2. Using a jack, slowly raise the front differential carrier assembly to its installation position.

    3. Temporarily install the front differential support assembly with bolts A and B and the nut.

    4. Temporarily install the bolts C and D.

    5. Tighten bolt A.

      Torque:
      120 N*m  { 1224 kgf*cm, 89 ft.*lbf }

    6. Tighten bolt B and the nut.

      Torque:
      120 N*m  { 1224 kgf*cm, 89 ft.*lbf }

    7. Tighten bolts C and D.

      Torque:
      120 N*m  { 1224 kgf*cm, 89 ft.*lbf }

    8. Connect the breather tube to the front differential union.

  2. INSTALL FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY LH


    1. A0158XU

      Install the suspension rebound stopper LH with the 3 bolts.

      Torque:
      58 N*m  { 591 kgf*cm, 43 ft.*lbf }

  3. INSTALL FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY RH


    1. A015A75

      Install the suspension rebound stopper RH with the 3 bolts.

      Torque:
      58 N*m  { 591 kgf*cm, 43 ft.*lbf }

  4. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH


    1. Install the front drive shaft Click here.

  5. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Use the same procedure as the LH side.

  6. INSTALL FRONT PROPELLER SHAFT ASSEMBLY


    1. Install the front propeller shaft Click here.