Click here

REAR DIFFERENTIAL CARRIER ASSEMBLY (for Standard) REMOVAL

Click here
Click here Click here
  1. Click here

    DRAIN DIFFERENTIAL OIL


    1. Stop the vehicle on a level place.

    2. A015CRJ

      for Front Differential:


      1. Remove the engine under cover.

      2. Using a 10 mm hexagon wrench, remove the filler plug and gasket.

      3. Using a 10 mm hexagon wrench, remove the drain plug and gasket, and drain the oil.

      4. Using a 10 mm hexagon wrench, install a new gasket and the drain plug.

        39 N*m 400 kgf*cm 29 ft.*lbf

    3. for Rear Differential:


      1. Remove the filler plug and gasket.

      2. Remove the drain plug and gasket, and drain the oil.

      3. Install a new gasket and the drain plug.

        49 N*m 500 kgf*cm 36 ft.*lbf
  2. Click here

    REMOVE REAR AXLE SHAFT


    1. Remove the axle shaft (Click here).

  3. Click here

    DISCONNECT REAR PROPELLER SHAFT ASSEMBLY


    1. A01587KE01

      Place matchmarks on the rear propeller shaft and companion flange.

    2. Remove the 4 nuts, 4 washers and 4 bolts, and disconnect the propeller shaft from the differential side.

    3. Support the propeller shaft securely.

  4. Click here

    REMOVE REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY


    1. A01568T

      Remove the 10 nuts, 10 washers and differential carrier.

      Note:

      Be careful not to damage the contact surfaces of the differential carrier and rear axle housing.

    2. Remove the gasket.