Click here

OIL PUMP REASSEMBLY

Click here
Click here Click here
  1. Click here

    INSTALL FRONT OIL PUMP OIL SEAL


    1. Using SST and a hammer, tap in a new oil seal.

      09950-60010 09951-00650
      09950-70010 09951-07100
      Tip:

      The oil seal end should be flush with the outer edge of the pump body.

    2. Coat the lip of the oil seal with MP grease.

  2. Click here

    FIX FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. Place the oil pump body on the torque converter clutch.

  3. Click here

    INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. Coat the driven gear with ATF.

    2. Install the driven gear to the oil pump body.

  4. Click here

    INSTALL FRONT OIL PUMP DRIVE GEAR


    1. Coat the drive gear with ATF.

    2. Install the drive gear to the oil pump body.

  5. Click here

    INSTALL FRONT OIL PUMP BODY O-RING


    1. Coat a new O-ring with ATF and install it to the oil pump body.

  6. Click here

    INSTALL STATOR SHAFT ASSEMBLY


    1. Align the stator shaft with the bolt holes.

    2. Install the 17 bolts.

      11 N*m 112 kgf*cm 8 ft.*lbf
  7. Click here

    INSTALL CLUTCH DRUM OIL SEAL RING


    1. Coat 3 new oil seal rings with ATF.

    2. Squeeze the ends of the 3 oil seal rings together so that the overlap distance is 8 mm (0.314 in.) or less, and then install them to the starter shaft groove.

      Note:

      Do not excessively widen the rings.

      Tip:

      After installing the oil seal rings, check that they rotate smoothly.

  8. Click here

    INSPECT OIL PUMP DRIVE GEAR ROTATION


    1. Place the oil pump body on the torque converter clutch.

    2. Check that the drive gear rotates smoothly.

    3. Remove the oil pump assembly from the torque converter.

  9. Click here

    INSTALL AUTOMATIC TRANSMISSION CASE O-RING


    1. Coat a new O-ring with ATF and install it to the oil pump.