CLUTCH RELEASE CYLINDER REASSEMBLY


  1. INSTALL RELEASE CYLINDER BLEEDER PLUG


    1. Install the bleeder plug to the cylinder body.

      Torque:
      11 N*m  { 110 kgf*cm, 8 ft.*lbf }

  2. INSTALL CLUTCH RELEASE CYLINDER KIT


    1. Install 2 new cylinder cups onto a new piston.

    2. Install a new spring into the cylinder body.

    3. A015AJNE09

      Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.

    4. Install the piston into the cylinder body.

      Note

      Do not damage the inside of the cylinder body.

    5. Install the push rod into the cylinder body.

    6. Install a new boot onto the cylinder body.