OIL PUMP REASSEMBLY


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A015ADYE06

      Using SST and a hammer, tap in a new oil seal.

      SST
      09350-30020   ( 09351-32140 )

      Tech Tips

      The oil seal end should be flush with the outer edge of the pump body.

    2. Coat the lip of the oil seal with MP grease.

  2. FIX FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. Place the oil pump body on the torque converter clutch.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A0158NWE01

      Coat the driven gear with ATF.

    2. Install the driven gear to the oil pump body.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A015ASXE01

      Coat the drive gear with ATF.

    2. Install the drive gear to the oil pump body.

  5. INSTALL FRONT OIL PUMP BODY O-RING


    1. A015CM8E02

      Coat a new O-ring with ATF and install it to the oil pump body.

  6. INSTALL STATOR SHAFT ASSEMBLY


    1. A015D05E01

      Align the stator shaft with the bolt holes.

    2. Install the 14 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

  7. INSTALL CLUTCH DRUM OIL SEAL RING


    1. A015CJ2E06

      Coat 3 new oil seal rings with ATF.

    2. Squeeze the ends of the 3 oil seal rings together with an overlap distance of 8 mm (0.314 in.) or less, and then install them to the starter shaft groove.

      Note

      Do not excessively widen the ring.

      Tech Tips

      After installing the oil seal rings, check that they rotate smoothly.

  8. INSPECT OIL PUMP DRIVE GEAR ROTATION

    A015A0HE01

    1. Place the oil pump body on the torque converter clutch.

    2. Check that the drive gear rotates smoothly.

    3. Remove the oil pump assembly from the torque converter.

  9. INSTALL AUTOMATIC TRANSMISSION CASE O-RING


    1. A015608E03

      Coat a new O-ring with ATF and install it to the oil pump assembly.