SHIFT LEVER REASSEMBLY


  1. INSTALL SHIFT LOCK CONTROL ECU

    A0159XH

    1. Attach the 3 claws to install the ECU to the floor shift.

    2. Connect the shift lock solenoid connector.

  2. INSTALL LOWER POSITION INDICATOR HOUSING

    A015C29

    1. Attach the 6 claws to install the housing.

  3. INSTALL SHIFT LOCK RELEASE BUTTON

    A0155OG

    1. Attach the 2 claws to install the spring and button.

  4. INSTALL POSITION INDICATOR SLIDE COVER AND NO. 2 POSITION INDICATOR SLIDE COVER

    A015C8XE01

    1. Install the No. 2 position indicator slide cover to the position indicator slide cover.

    2. Install the position indicator slide cover together with the No. 2 position indicator slide cover.

      Tech Tips

      Install the position indicator slide cover so that its mark faces the vehicle front.

  5. INSTALL POSITION INDICATOR LENS

    A0159LT

    1. Attach the 4 claws to install the position indicator lens.

  6. INSTALL POSITION INDICATOR HOUSING ASSEMBLY

    A0158OB

    1. Attach the 4 claws to install the position indicator housing.

  7. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

    A015E6WE02

    1. Align the wire with the key part of the lower position indicator housing, and install the wire. Then rotate the wire clockwise until it locks.

    2. A015BUPE01

      Securely connect the 2 wire terminals to terminal 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.

    3. A015DCJ

      Check the shift lock solenoid and indicator light wire harness as shown in the illustration.

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    A0157ZIE02
    Torque:
    3 to 5 N*m  { 31 to 51 kgf*cm, 27 to 44 in.*lbf }