PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

    A015A5X

    1. Remove the clip and pin, and disconnect the shifting rod from the transmission control shaft lever RH.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the switch connector.

    2. A015E3T

      Remove the nut, spring washer and transmission control shaft lever RH.

    3. Remove the collar and transmission control rod bush from the transmission control shaft lever RH.

    4. A015A5C

      Using a screwdriver, bend the tabs of the lock washer.

    5. A015E2L

      Remove the lock nut and lock washer.

    6. A015934

      Remove the bolt and switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.