Click here

VALVE BODY ASSEMBLY INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL TRANSMISSION VALVE BODY ASSEMBLY


    1. Install the spring and check ball body.

    2. A0155EZE01

      Insert the pin of the manual valve into the hole of the manual valve lever.

    3. A015CVFE01

      Install the transmission valve body with the 19 bolts.

      11 N*m 112 kgf*cm 8 ft.*lbf
      Tip:

      Each bolt length is indicated below.

      36 mm (1.42 in.) for bolt A

      25 mm (0.984 in.) for bolt B

    4. Install the detent spring and detent spring cover with the bolt.

      10 N*m 102 kgf*cm 7 ft.*lbf
  2. Click here

    CONNECT TRANSMISSION WIRE


    1. A0157RUE02

      Connect the 7 connectors to the solenoid valves.

    2. Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.

      for bolt A
      10 N*m 102 kgf*cm 7 ft.*lbf
      for bolt B
      11 N*m 112 kgf*cm 8 ft.*lbf
      Tip:

      Each bolt length is indicated below.

      12 mm (0.472 in.) for bolt A

      36 mm (1.42 in.) for bolt B

  3. Click here

    INSTALL VALVE BODY OIL STRAINER ASSEMBLY


    1. Coat a new O-ring with ATF and install it to the oil strainer.

    2. Install the oil strainer with the 4 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
  4. Click here

    INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

    Note:

    Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.


    1. Install a new gasket and the oil pan with the 20 bolts.

      4.4 N*m 45 kgf*cm 39 in.*lbf
  5. Click here

    RESET MEMORY

    (Click here)

  6. Click here

    ADD AUTOMATIC TRANSMISSION FLUID


    1. Add automatic transmission fluid (Click here).