Click here

TRANSMISSION WIRE INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR)


    1. Measure the resistance according to the value(s) in the table below.

      Tip:

      If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

      Standard Resistance
      Tester Connection ATF Temperature Specified Condition
      2 (OT-) - 10 (OT+) 10°C (50°F) 5 to 8 kΩ
      2 (OT-) - 10 (OT+) 25°C (77°F) 2.5 to 4.5 kΩ
      2 (OT-) - 10 (OT+) 110°C (230°F) 0.22 to 0.28 kΩ
      1 (OT2-) - 9 (OT2+) 10°C (50°F) 5 to 8 kΩ
      1 (OT2-) - 9 (OT2+) 25°C (77°F) 2.5 to 4.5 kΩ
      1 (OT2-) - 9 (OT2+) 110°C (230°F) 0.22 to 0.28 kΩ

      If the result is not as specified, replace the transmission wire.