CLUTCH SWITCH (for RHD) INSTALLATION


  1. INSTALL CLUTCH SWITCH ASSEMBLY


    1. A015DID

      Install the clutch switch assembly and tighten the adjusting nut.

      Torque:
      16 N*m  { 163 kgf*cm, 12 ft.*lbf }
    2. A015D3PE01

      Adjust the clutch switch so that the threaded portion of the clutch switch lightly contacts the cushion. Then tighten the adjusting nut and check the contact of the cushion and switch.

      Torque:
      16 N*m  { 163 kgf*cm, 12 ft.*lbf }

      Note

      After adjusting the pedal free play, perform the clutch switch assembly adjustment Click here.

  2. INSTALL CLUTCH PEDAL BRACKET SUB-ASSEMBLY


    1. Install the clutch pedal bracket sub-assembly Click here.