Click here

OIL AND OIL FILTER REPLACEMENT

Click here
Click here Click here
CAUTION:

  • Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.

  • Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be washed with soap and water, or use waterless hand cleaner, to remove any used engine oil thoroughly. Do not use gasoline, thinners, or solvents.

  • In order to protect the environment, used oil and used oil filters must be disposed of at designated disposal sites.

Click here
  1. Click here

    DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. A0159J6

      Remove the 2 bolts and No. 2 engine under cover seal.

    3. Remove the oil pan drain plug and gasket, and drain the engine oil into a container.

    4. Install a new gasket and the oil pan drain plug.

      40 N*m 408 kgf*cm 30 ft.*lbf
  2. Click here

    REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. A01588F

      Remove the 3 bolts and screw.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

  3. Click here

    REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY LH


    1. A0159XN

      Remove the 5 bolts and No. 1 engine under cover sub-assembly LH.

  4. Click here

    REMOVE OIL FILTER ELEMENT


    1. A015A6BE10

      Connect a hose with an inside diameter of 15 mm (0.591 in.) to the pipe.

      Table 1. Text in Illustration
      *1 Pipe
      *2 Hose
    2. A01565V

      Remove the oil filter drain plug.

    3. A01567FE01

      Install the pipe to the oil filter cap.

      Table 2. Text in Illustration
      *1 Cap
      *2 Valve
      *3 Pipe
      *4 O-Ring
      *5 Hose
      Note:

      If the O-ring is removed with the drain plug, install the O-ring together with the pipe.

      Tip:

      Use a container to catch the draining oil.

    4. A0158W3

      Check that oil is drained from the oil filter. Then disconnect the pipe and remove the O-ring as shown in the illustration.

    5. A0155MKE02

      Using SST, remove the oil filter cap.

      09228-06501
      Table 3. Text in Illustration
      *1 Oil Filter Bracket Clip
      Note:

      Do not remove the oil filter bracket clip.

    6. A015DDVE02

      Remove the oil filter element and O-ring from the oil filter cap.

      Table 4. Text in Illustration
      *1 Oil Filter Element
      *2 O-Ring
      Note:

      Be sure to remove the cap O-ring by hand, without using any tools, to prevent damage to the cap O-ring groove.

  5. Click here

    INSTALL OIL FILTER ELEMENT


    1. Clean the inside of the oil filter cap, its threads and its O-ring groove.

    2. Apply a small amount of engine oil to a new O-ring and install it to the oil filter cap.

    3. Set a new oil filter element to the oil filter cap.

    4. Remove any dirt or foreign matter from the installation surface of the engine.

    5. Apply a small amount of engine oil to the O-ring again and temporarily install the oil filter cap.

      Note:

      Do not remove the oil filter bracket clip.

    6. A0159OCE02

      Using SST, tighten the oil filter cap.

      09228-06501
      25 N*m 255 kgf*cm 18 ft.*lbf
      Table 5. Text in Illustration
      *1 Oil Filter Bracket Clip
      Note:

      • When tightening the oil filter cap, do not remove the oil filter bracket clip.

      • Make sure that the oil filter is installed securely as shown in the illustration.

      • Be careful that the O-ring does not get caught between any surrounding parts.

    7. A015BR1E01

      Apply a small amount of engine oil to a new drain plug O-ring, and install it to the oil filter cap.

      Table 6. Text in Illustration
      *1 O-Ring
      Note:

      Before installing the O-ring, remove any dirt or foreign matter from the installation surface of the oil filter cap.

    8. Install the oil filter drain plug.

      13 N*m 127 kgf*cm 9 ft.*lbf
      Note:

      Be careful that the O-ring does not get caught between any surrounding parts.

    9. Install the No. 2 engine under cover seal with the 2 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
  6. Click here

    ADD ENGINE OIL


    1. Add fresh oil and install the oil filler cap.

      Standard Oil Grade
      Oil Grade Oil Viscosity (SAE)
      API grade SL "energy-conserving", API grade SM "energy-conserving", API grade SN "energy-conserving" or ILSAC multigrade engine oil

      5W-30

      10W-30
      API grade SL, SM or SN multigrade engine oil

      15W-40

      20W-50
      Standard Oil Capacity
      Item Specified Condition
      Drain and refill without oil filter change 7.1 liters (7.5 US qts, 6.2 Imp. qts)
      Drain and refill with oil filter change 7.5 liters (7.9 US qts, 6.6 Imp. qts)
      Dry fill 9.3 liters (9.8 US qts, 8.2 Imp. qts)
  7. Click here

    INSPECT FOR OIL LEAK


    1. Start the engine. Make sure that there are no oil leaks from the area that was worked on.

  8. Click here

    INSPECT ENGINE OIL LEVEL


    1. Warm up the engine. Then stop the engine and wait for 5 minutes.

    2. A0158LWE01

      Check that the engine oil level is between the dipstick low level mark and full level mark.

      Table 7. Text in Illustration
      *a Measuring Surface
      *b Low Level Mark
      *c Full Level Mark

      If the level is low, check for leakage and add oil up to the full level mark.

      Note:

      Do not fill engine oil above the full level mark.

      Tip:

      A certain amount of engine oil will be consumed while driving. In the following situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals.


      • When the engine is new, for example directly after purchasing the vehicle or after replacing the engine.

      • If low quality oil or oil of an inappropriate viscosity is used.

      • When driving at high engine speed or with a heavy load, (when towing, or), when driving while accelerating or decelerating frequently.

      • When leaving the idling for a long time, or when driving frequently through heavy traffic.

      When judging the amount of oil consumption, keep in mind that the oil may have become diluted, making it difficult to judge the true level accurately.

  9. Click here

    INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY LH


    1. Install the No. 1 engine under cover with the 5 bolts.

      29 N*m 296 kgf*cm 21 ft.*lbf
  10. Click here

    INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. Push in the clip to install the front fender splash shield sub-assembly LH.

    2. Install the 3 bolts and screw.