Click here

OIL PRESSURE SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. A01588F

      Remove the 3 bolts and screw.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

  2. Click here

    REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. A0159SG

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

  3. Click here

    REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. A0157XJ

      Remove the 10 bolts and No. 1 engine under cover.

  4. Click here

    DRAIN ENGINE OIL


    1. A0158YG

      Remove the 2 bolts and No. 2 engine under cover seal from the No. 2 engine under cover.

    2. Remove the oil filler cap.

    3. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

    4. Install a new gasket and the oil pan drain plug.

      38 N*m 387 kgf*cm 28 ft.*lbf
  5. Click here

    REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY


    1. A0155E5

      Disconnect the oil pressure sender gauge connector.

    2. Remove the oil pressure sender gauge.