EXHAUST PIPE (w/o DPF) REMOVAL

CAUTION:


  • Wear protective gloves and protective glasses when removing the exhaust pipe.

  • The exhaust pipe is extremely hot immediately after the engine has stopped.

  • Confirm that the exhaust pipe has cooled down before removing it.


  1. REMOVE FRONT FENDER APRON SEAL REAR RH


    1. A015D4I

      Using a clip remover, remove the 4 clips and fender apron seal.

  2. REMOVE FRONT FENDER APRON SEAL REAR LH


    1. A0155AV

      Using a clip remover, remove the 4 clips and fender apron seal.

  3. REMOVE NO. 2 ENGINE UNDER COVER


    1. A0157AP

      Remove the 6 bolts and under cover.

  4. REMOVE TAILPIPE ASSEMBLY


    1. Remove the bolt, clamp and gasket.

    2. Disconnect the tailpipe from the 2 exhaust pipe supports.

  5. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. Remove the 4 bolts and 2 compression springs.

    2. Disconnect the center exhaust pipe from the 3 exhaust pipe supports.

    3. Remove the gasket from the front exhaust pipe.

  6. REMOVE FRONT NO. 1 EXHAUST PIPE ASSEMBLY


    1. Remove the 2 nuts and front exhaust pipe.

    2. Remove the gasket.

  7. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY


    1. Remove the 2 nuts, 2 bolts and front exhaust pipe.

    2. Remove the gasket.

  8. REMOVE MONOLITHIC CONVERTER ASSEMBLY RH (w/ Monolithic Converter)


    1. A015BPX

      Remove the 3 bolts and manifold stay RH.

    2. Remove the 3 nuts and monolithic converter RH.

    3. Remove the gasket from the turbocharger.

  9. REMOVE MONOLITHIC CONVERTER ASSEMBLY LH (w/ Monolithic Converter)


    1. A015BJG

      Remove the 3 bolts and manifold stay LH.

    2. Remove the 3 nuts and monolithic converter LH.

    3. Remove the gasket from the turbocharger.

  10. REMOVE OUTLET TURBINE ELBOW RH (w/o Monolithic Converter)


    1. A015ARE

      Remove the 3 bolts and manifold stay RH.

    2. Remove the 3 nuts and outlet turbine elbow RH.

    3. Remove the gasket from the turbocharger.

  11. REMOVE OUTLET TURBINE ELBOW LH (w/o Monolithic Converter)


    1. A0159SO

      Remove the 3 bolts and manifold stay LH.

    2. Remove the 3 nuts and outlet turbine elbow LH.

    3. Remove the gasket from the turbocharger.