Click here

THERMOSTAT INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT WATER INLET WITH THERMOSTAT

    A015CJW
    Tip:

    The valve opening temperature is inscribed on the thermostat.


    1. A015CQ2

      Immerse the thermostat in water, then gradually heat the water.

    2. Check the valve opening temperature of the thermostat.

      Standard valve opening temperature
      80 to 84°C (176 to 183°F)

      If the valve opening temperature is not as specified, replace the water inlet with thermostat.

    3. A015D85E01

      Check the valve lift.

      Standard valve lift
      8.0 mm (0.315 in.) or more at 95°C (203°F)

      If the valve lift is not as specified, replace the water inlet with thermostat.

    4. Check that the valve is fully closed when the water inlet with thermostat is at a low temperature (below 77°C (171°F)).

      If not fully closed, replace the thermostat.