Click here

EXHAUST FUEL ADDITION INJECTOR (for DPF) INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT EXHAUST FUEL ADDITION INJECTOR ASSEMBLY


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 7.1 to 7.9 Ω
      Tip:

      The temperature indicated under "Condition" is the temperature of the exhaust fuel addition injector assembly.

      If the result is not as specified, replace the exhaust fuel addition injector assembly.