AIR CONDITIONING SYSTEM (for Manual Air Conditioning System), Diagnostic DTC:B1445

DTC Code DTC Name
B1445 Cool Air Bypass Damper Control

DESCRIPTION

The No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air outlet damper to any position, which controls the air outlet changes.

Tech Tips

Confirm that no mechanical problem is present because this trouble code may be stored when either a damper link or damper is mechanically locked.

DTC Code DTC Detection Condition Trouble Area
B1445 The air outlet damper position does not change for 30 seconds or more when the air conditioning amplifier assembly operates the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo).

  • No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo)

  • Air conditioning harness assembly

  • Air conditioning amplifier assembly

WIRING DIAGRAM

A0159IJE78

INSPECTION PROCEDURE

PROCEDURE


  1. READ VALUE USING INTELLIGENT TESTER (COOL AIR BYPASS PULSE)


    1. Use the Data List to check if the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo) is functioning properly Click here.

      Air Conditioner
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Cool Air Bypass Pulse No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo) target pulse / Min.: 0, Max.: 255

      • Shut and DEF mode: 6 (pulse)

      • Shut: 28 (pulse)

      • Open: 57 (pulse)

      		 -
      OK
      The display is as specified in the normal condition column.
      Result
      Result Proceed to
      OK (When troubleshooting according to the DTC) A
      OK (When troubleshooting according to problem symptoms table) B
      NG C

    B

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    C

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY Click here

    A

  2. REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (COOLER BYPASS DAMPER SERVO)


    1. Temporarily replace the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo).


      Tech Tips

      Since the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo) cannot be inspected while it is removed from the vehicle, replace the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo) with a new or normally functioning one.

    2. Clear the DTCs Click here.

    3. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1445 is not output A
      DTC B1445 is output B

    B

    REPLACE AIR CONDITIONING HARNESS ASSEMBLY Click here

    A

    END (NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY [COOLER BYPASS DAMPER SERVO] IS FAULTY)

  3. REPLACE AIR CONDITIONING HARNESS ASSEMBLY


    1. Temporarily replace the air conditioning harness assembly with a new or normally functioning one.


    2. Clear the DTCs Click here.

    3. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1445 is not output A
      DTC B1445 is output B

    B

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY Click here

    A

    END (AIR CONDITIONING HARNESS ASSEMBLY IS FAULTY)