Click here

AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) Rear Air Conditioning Control Panel Circuit

Click here
Click here Click here
DTC Code DTC Name
  Rear Air Conditioning Control Panel Circuit
Click here

DESCRIPTION

This circuit consists of the No. 2 air conditioning control assembly* and the air conditioning amplifier assembly. When the No. 2 air conditioning control assembly is operated, signals are transmitted to the air conditioning amplifier assembly through the LIN communication system.

If the LIN communication system malfunctions, the air conditioning amplifier assembly does not operate even if the No. 2 air conditioning control assembly is operated.

Tip:

*: w/ Rear Heater

Click here

WIRING DIAGRAM

Click here

INSPECTION PROCEDURE

Click here

PROCEDURE


  1. Click here

    INSPECT FUSE (ECU-IG NO. 2)


    1. Remove the ECU-IG NO. 2 fuse from the cowl side junction block LH.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      ECU-IG NO. 2 fuse Always Below 1 Ω

  2. Click here

    CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING CONTROL - BODY GROUND AND BATTERY)


    1. Disconnect the E55 No. 2 air conditioning control assembly connector.

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      E55-1 (E) - Body ground Always Below 1 Ω
      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      E55-6 (IG) - Body ground Engine switch on (IG) 11 to 14 V

  3. Click here

    CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - NO. 2 AIR CONDITIONING CONTROL)


    1. Disconnect the E55 No. 2 air conditioning control assembly connector.

    2. Disconnect the E36 amplifier connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      E36-21 (RLIN) - E55-4 (RLIN) Always Below 1 Ω
      E55-4 (RLIN) - Body ground Always 10 kΩ or higher
      E36-21 (RLIN) - Body ground

  4. Click here

    CHECK NO. 2 AIR CONDITIONING CONTROL ASSEMBLY (OPERATION)


    1. Replace the No. 2 air conditioning control assembly with a new or properly functioning one (Click here).

    2. Operate the No. 2 air conditioning control assembly to check that it functions properly.

      OK
      No. 2 air conditioning control assembly function operates normally.

  5. Click here

    REPLACE NO. 2 AIR CONDITIONING CONTROL ASSEMBLYClick here

  6. Click here

    REPLACE FUSE

  7. Click here

    REPAIR OR REPLACE HARNESS OR CONNECTOR

  8. Click here

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLYClick here