AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) SYSTEM DESCRIPTION


  1. GENERAL


    1. The air conditioning system has the following features:


      • The 4-ZONE air conditioner system controls the temperature of the front and rear seats independently. In addition, it uses the amount of sunlight and temperature of each seat to adjust the temperature and airflow volume. When the 4-ZONE switch is on, the temperature, the airflow mode and airflow volume of each of the 4 seats (driver, front passenger, rear left, rear right) are automatically adjusted.

      • The 2-ZONE air conditioner system controls the temperature of the left and right seats independently, and sets the temperature for the driver seat and front passenger seat. In addition, it uses the amount of sunlight and temperature of the left and right seats to adjust the temperature and airflow volume.

        When the 2-ZONE switch is on, the temperature, airflow mode and airflow volume of the driver seat and front passenger seat are automatically adjusted.

      • In accordance with the temperature set using the temperature control switch, the air conditioning amplifier assembly determines the outlet temperature based on the input signals from various sensors. In addition, corrections are made in accordance with the signals from the water temperature sensor to control the outlet air temperature.

      • Controls the blower motor in accordance with the airflow volume determined by the air conditioning amplifier assembly based on the input signals from various sensors.

      • Automatically changes the outlets in accordance with the outlet mode ratio that is determined by the air conditioning amplifier assembly based on the input signals from various sensors.

      • Based on the signals from the ambient temperature sensor, this system calculates the outside temperature and indicates it in the multi-information display in the combination meter.

      • For vehicles with the rear air conditioner, there are rear side and roof side air ducts, and independent temperature and airflow mode adjustments are automatically performed.

      • The Positive Temperature Coefficient (PTC) heater system contains a PTC heater that heats the air that has passed through the heater core to ensure proper heater performance.

      • A compact, lightweight, and highly efficient straight flow (full-path flow) aluminum heater core is used.

      • The micro dust and pollen filter control is used to remove pollen in the air around the upper areas of the driver and front passenger seats.

      • The air conditioning amplifier assembly is equipped with a self diagnosis function. If there is a malfunction in the system, it stores the DTCs (Diagnostic Trouble Codes) in its memory.

  2. MODE POSITION AND DAMPER OPERATION

    A015DSZE03
    Function of Main Damper
    Control Damper Operation Position Damper Position Operation
    Air Inlet Control Damper Fresh A Brings in fresh air.
    Recirculation B Recirculates internal air.
    Air Mix Control Damper Max Cool to Max Hot K, L, M Varies the mixture ratio of cold air and hot air in order to regulate the temperature continuously from hot to cool.
    Cool Air Bypass Control Damper Max Cool to Max Hot H, I, J Cool air blows out from the front center register and side registers in order to adjust the temperature around the heads of the occupants during cooling or warming.
    Mode Control Damper A0155CS

    Def

    C Defrosts the windshield through the center defroster.
    A01575T

    Foot/Def

    D

    Defrosts the windshield through the center defroster and side defroster while air is also blown out from the front and rear footwell register ducts.

    In addition, air blows out slightly from the front and rear center registers and side register.

    A015C3P

    Foot

    E

    Air blows out of the front and rear footwell register duct, front and rear center register and side register.

    In addition, air blows out slightly from the center defroster and side defroster.

    A0155HG

    Bi - Level

    F

    Air blows out of the center registers, side register, and rear center register to defrost the windshield.

    Air also blows out from the front and rear footwell register ducts.

    A015CR1

    Face

    G Air blows out of the center registers and side registers to defrost the windshield.
    A01584VE01
    Function of Main Damper
    Control Damper Operation Position Damper Position Operation
    Mode Control Damper A015CR1

    Face

    A Air blows out of the rear roof side register.
    A0155HG

    Bi - Level

    B Air blows out of the rear roof side register and rear footwell register.
    A015C3P

    Foot

    C Air blows out of the rear footwell register.
    Air Mix Control Damper Max Cool to Max Hot D, E Varies the mixture ratio of cold air and hot air in order to regulate the temperature continuously from hot to cool.
  3. AIR OUTLETS AND AIRFLOW VOLUME

    A0155ZJE01
    Air Outlet Mode Selectable Mode Register Register Duct Defroster
    Automatic Manual Center Side Front Foot Rear Face Rear Foot
    A B C D E F
    A015CR1 FACE-U*1 A015DW6 A015DW6 - A0159GM - -
    FACE-L*2, *6 - A015DW6 A015DW6 A0156RN A0159GM - -
    A0155HG B/L-U*1 A0159GM A0159GM A015CXZ A015CXZ A0156RN -
    B/L*2 - A0159GM A0159GM A0159GM A015CXZ A015CXZ -
    A015C3P FOOT F*3 - A015CXZ A015CXZ A015DW6 A0157DW A015CXZ A0156RN
    FOOT R*4 A015CXZ A015CXZ A015DW6 A0157DW A015DW6 A0156RN
    FOOT D*5 - A015CXZ A015CXZ A015DW6 A0157DW A015DW6 A015CXZ
    A01575T F/D A015CXZ A015CXZ A0159GM A0157DW A015CXZ A015DW6
    A0155CS DEF - - - - - A015DW6

    Tech Tips


    • The size of the circle indicates the proportion of airflow volume.

    • *1: Greater airflow volume at the upper area.

    • *2: Greater airflow volume at the lower area.

    • *3: Greater airflow volume at the front.

    • *4: Greater airflow volume at the rear foot.

    • *5: Greater airflow volume at the defroster.

    • *6: In contrast to FACE-U, a small amount of air comes out of the front footwell register duct.

    A015D0SE01
    Air Outlet Mode Register Duct
    Roof Rear Foot 1 Rear Side 2 Rear Foot 2 C Pillar
    A B C D E
    A015CR1 FACE A0159GM - - - -
    A0155HG BI-LEVEL A015CXZ A0157DW A0157DW A0156RN A0156RN
    A015C3P FOOT - A0156RN A0156RN A015CXZ A015CXZ

    Tech Tips

    The size of the circle indicates the proportion of airflow volume.