REAR NO. 2 SEAT OUTER BELT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    A015DRAE01

    1. Align the claws with the seat belt positioning holes and install the retractor of the seat belt as shown in the illustration.

    2. Install the seat belt with the bolt.

      Torque:
      42 N*m  { 427 kgf*cm, 31 ft.*lbf }
    3. A015D6A

      Install the seat belt shoulder anchor with the bolt.

      Torque:
      42 N*m  { 427 kgf*cm, 31 ft.*lbf }
    4. A015DKJ

      Attach the 2 claws to close the seat belt shoulder anchor cover.

  2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    A0157OV

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. w/o Rear Air Conditioning System:

      Connect the rear seat lock control lever cable.

    2. w/ Rear Air Conditioning System:

      Connect the thermistor connector and rear seat lock control lever cable.

    3. Attach the 18 clips and 2 claws to install the quarter trim panel.

    4. Install the clip and bolt.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }
      A0157GF
    5. A0156NHE01

      for LH Side:


      1. Install the rear No. 2 seat belt anchor LH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

    6. A015C42

      for RH Side:


      1. Install the rear No. 2 seat belt anchor RH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      2. A015DRR

        Attach the 3 claws to install the cover.

    7. A015CT4

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    8. A0158A5

      Attach the 3 claws to install the cover.

  3. INSTALL REAR NO. 2 SEAT COVER BEZEL

    A0156BS

    1. Attach the 6 clips to install the rear No. 2 seat cover bezel.

  4. INSTALL REAR DOOR SCUFF PLATE LH

    A015BJQ

    1. Attach the 3 claws and 4 clips to install the scuff plate.

    2. Install the screw.

  5. INSTALL REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. Attach the 2 claws to install the step cover.

  6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A015BES

    1. Attach the 6 clips to install the support plate.

  7. INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Install the rear No. 2 seat assembly Click here.